Electrohydraulic barrier FAAC 640
Home 
Products Electrohydraulic barrier FAAC 640
Technical specifications
| Hydraulic pump | |
| Type of oil | FAAC HP OIL |
| Electric motor | |
| Motor rotation speed | 1400 - 2800 rpm |
| Powerout | 220 W |
| Supply voltage/ Frequency | 230 V / 50 Hz |
| Service | |
| Lifting power | 0-470 Nm / 0-340 Nm / 0-250 Nm / 0-210 Nm |
| Speed | to 6 sec. |
| Working temperature | -20°C / +55°C |
| Dimensions | 38 x 20 x 108 cm |
| Construction features | |
| Colour | orange RAL 2004 |
| Height | 108 cm |
| Total weight | 84 kg |
Electrohydraulic barrier FAAC 640
Intensive electrohydraulic barrier with 100% working capacity and to 150 opening-closing cycles per hour, beam length to 7 meters and beam speed to 6 sec.
It has test protocol and a NEMKO sertificate with 2 000 000 cycles warranty without any service.
Rectangualr beam with dimensions 50 mm х 100 mm, it can be optionally provided with skirts and reflective stickers. Barrier FAAC 640 is suitable for heavy duty parkings and access control systems. It has software slowing of speed at end positions while opening and closing allowing smooth movement while stopping.
FAAC 640 supports safety photocells, signal lamp, beam led lights, remote control, magnetic card readers, electronic chips, etc.
There are 10 programs installed on the control board which allow different working modes depending on the property requirements.
The barrier is equipped with microprocessor control board FAAC 624 BLD, with integrated two-channel magnetic loop detector.
In case of power failure FAAC 640 can be unblocked for manual control using a special key.
